Guide

How to calculate GPA

GPA is a credit-weighted average of grade points. That is the whole idea, and almost every confusion about GPA — why a C hurt more than an A helped, why a 3.31 semester barely moved a 3.40 — falls out of those three words: credit-weighted average.

This page is the maths, without a calculator in the way. Every number here can be reproduced by hand or with the tools linked at the bottom.

The formula

Three steps, in this order:

  1. Convert each grade to grade points using your school's scale (A = 4.0, B = 3.0 on the standard 4.0 scale).
  2. Multiply by credits to get quality points: a 4-credit A is 4.0 × 4 = 16 quality points.
  3. Divide total quality points by total credits.

GPA = Σ (grade points × credits) ÷ Σ credits

The multiplication in step 2 is what makes GPA an average and the division in step 3 is what normalises it. Skipping step 2 — averaging the grade points directly — gives a course-weighted average, which is only correct when every course has the same credits.

Same formula, different names

Semester GPA uses the courses of one term. Cumulative GPA uses every course you have taken, so it is the same formula with more rows. Weighted GPA is the same formula with a bonus added to the grade points of Honors and AP courses. Nothing else changes.

The four scales, side by side

Before you calculate anything, confirm which table your school uses. The differences look small until you multiply them by a semester of credits.

Letter grade → grade points on each scale
LetterStandard 4.04.3 scale4.5 scale5.0 scale
A+4.04.34.55.0
A4.04.04.05.0
A-3.73.73.74.7
B+3.33.33.34.3
B3.03.03.04.0
B-2.72.72.73.7
C+2.32.32.33.3
C2.02.02.03.0
C-1.71.71.72.7
D+1.31.31.32.3
D1.01.01.02.0
D-0.70.70.71.7
F0.00.00.00.0
  • 4.0 standard. A+ and A both earn 4.0. This is the most common table in US colleges and high schools.
  • 4.3. Identical except an A+ earns 4.3. Used where the school wants to reward a perfect score.
  • 4.5. An A+ bonus scale used by some districts: A+ 4.5, A 4.0.
  • 5.0. A top-of-scale table where an A is 5.0. Common for weighted transcripts where AP courses are meant to be able to reach 5.0.

If your school's table is none of these, use the GPA-points input mode in the calculator and type the values from your handbook. Guessing at a scale is the most common source of a GPA that disagrees with the transcript.

Example 1: a plain semester

Five courses, sixteen credits, all Regular, standard 4.0 scale:

Example 1 — semester GPA
CourseGradeGrade pointsCreditsQuality points
MathA4.0416.0
EnglishB+3.339.9
HistoryA-3.7311.1
BiologyC2.048.0
ArtA4.028.0
Total——1653.0

53.0 ÷ 16 = 3.3125 → 3.31. Note that the plain average of the five grade points would be (4.0 + 3.3 + 3.7 + 2.0 + 4.0) ÷ 5 = 3.40 — higher, and wrong, because it gives the two-credit Art course the same pull as the four-credit Math course.

Example 2: a rough term

Two courses, six credits: Chemistry D+ (3 credits) and Physics D- (3 credits).

D+ is 1.3 and D- is 0.7, so (1.3 × 3) + (0.7 × 3) = 3.9 + 2.1 = 6.0 quality points over 6 credits = 1.00. Passed everything, still a 1.00 — which is the number in the GPA, not the letters.

This is also the example that breaks most online calculators: several stop their table at D or omit D-, so a D- either disappears from the transcript or silently becomes a D. TermGrade carries all thirteen letters, including the ones that make averages ugly.

Example 3: cumulative GPA

Take Example 1 and add a transcript that already stands at 3.40 after 60 credits.

Prior quality points: 3.40 × 60 = 204.0. Add the new term: 204.0 + 53.0 = 257.0. Credits: 60 + 16 = 76. Cumulative GPA = 257.0 ÷ 76 = 3.3815… → 3.38.

Averaging the two GPAs instead — (3.40 + 3.31) ÷ 2 = 3.355 → 3.36 — is wrong, because it treats a 60-credit history and a 16-credit term as equal. The gap between 3.36 and 3.38 is exactly the credit weighting you would be throwing away.

Rounding rules

  • Round at the end, not in the middle. Keep quality points as decimals and only round the final GPA. Rounding each course to whole points first can shift a semester by 0.05 or more.
  • Two decimals is the convention. A GPA is reported as 3.31, not 3.3, and 1.00, not 1.
  • Schools may truncate rather than round. Some registrars cut 3.318 to 3.31 instead of rounding to 3.32, because scholarship cutoffs sit at exact values. Check before you rely on the second decimal.
  • Repeated courses. Policies vary: some schools replace the old grade, some average the two, some exclude the first attempt from the divisor. Your transcript's rule wins over any formula here.

If you only have percentages

Convert each percentage to a letter with your syllabus bands first, then to grade points. This page's calculators use the following bands; treat them as a default, not as your school's rule.

Percentage → letter grade (the conversion this calculator uses)
LetterPercentage
A93–100
A-90–92
B+87–89
B83–86
B-80–82
C+77–79
C73–76
C-70–72
D+67–69
D63–66
D-60–62
Fbelow 60

Five mistakes that make hand-calculated GPAs wrong

  1. Averaging GPAs instead of quality points. The 3.40 + 3.31 example above.
  2. Forgetting partial-credit courses. A 0.5-credit lab still contributes 0.5 credits to the divisor; dropping it changes both terms of the fraction.
  3. Using the wrong scale for A+ or D-. A 4.0 table without D- either loses the course or promotes it.
  4. Counting transfer or pass/fail credits as graded. Pass/fail usually adds credits without grade points, or is excluded entirely — check which.
  5. Forgetting that weighted and unweighted are different questions. A weighted 4.3 and an unweighted 3.6 can describe the same transcript.

Do the arithmetic with a calculator instead

The GPA calculator runs this exact formula for an unlimited number of courses, both weighted and unweighted, and can fold in prior coursework for the cumulative figure. The cumulative GPA calculator opens the prior-coursework panel by default, the weighted GPA calculator puts course levels first, and the final exam calculator works the same weighted-average maths backwards to tell you the score you need on the final.

Frequently asked questions

What is a good GPA?
On the 4.0 scale, 3.0 is the common floor for graduate school and many employers, 3.5 opens most master's programs and scholarship tiers, and 3.8 and above is competitive for selective law, medical and doctoral programs. Context matters more than the cutoffs: a 3.4 in engineering and a 3.4 in an unweighted humanities load are read differently.
Does an A+ raise my GPA above 4.0?
Not on the standard 4.0 scale, where A+ and A are both 4.0. On a 4.3 scale an A+ earns 4.3, and a weighted transcript can exceed 4.0 through Honors and AP bonuses. Check your school's table before assuming.
How do I calculate GPA with weighted courses?
Add the course bonus to the grade points before multiplying by credits: an Honors A becomes 4.5 and an AP B+ becomes 4.3. Then use the normal formula. Keep a second, unweighted calculation, because most colleges rebuild your GPA without the bonus.
What counts as a credit?
Whatever your registrar uses: credit hours, course units, or Carnegie units. The unit itself does not matter as long as every course uses the same one, because GPA is a ratio of two credit totals.
Can I calculate my GPA from letter grades only?
Yes — that is the standard method. Percentages matter only if your school reports them and you need to convert to letters yourself. Once you have the letter, the grade points are fixed by the scale.
Why is my calculated GPA different from my transcript?
Usually one of four reasons: a different scale (especially for A+ and D-), repeated courses handled a different way, transfer or pass/fail credits included on one side only, or the registrar truncating instead of rounding. Compare one course at a time against the transcript and the difference will show up quickly.